During the machining and production process of titanium alloy fasteners, because the closeness of the mechanical parts is not so high when the fasteners are installed, it is easy to produce certain gaps, so that there will be surface gaps between the metal gaps. Paint ingress, which makes fasteners susceptible to corrosion during production. During subsequent use, the tightness of the connection will be affected. The reason why titanium alloy materials have relatively high corrosion resistance is because of the presence of oxygen in the air. After the oxidation reaction of titanium block and oxygen, a protective film will be formed on the surface. This layer of film can effectively protect the titanium alloy inside the material from oxidation, thereby improving the corrosion resistance of the titanium alloy material. However, in the actual machining process of titanium alloy fasteners, because the environment is constantly changing, including the surrounding temperature, humidity, and the oxidation of equipment during processing, etc., it will lead to the failure of titanium alloy fasteners. Corrosion is easy to occur, which is one of the problems that titanium alloy fasteners are prone to in the production process.
2023年5月14日星期日
ASTM B348 Titanium Bar, ASTM B348 Titanium Rod Suppliers - HST TITANIUM
Titanium bar/rod—a hot rolled, forged, or cold worked semifinished solid section product whose cross-sectional area is equal to or less than 16 in. (10323 mm); ASTM B348 Round Bar is a very popular go-to for many products.
Titanium bar/rod manufacturing state(ASTM B348):
Hot Rolling（R）
Cold Rolling（Y）
Annealing（M）
Solid solution（ST）
2023年5月11日星期四
The difference between titanium alloy and aluminum alloy?
First, how to distinguish aluminum alloy and titanium alloy?
1. If you have two pieces of material on hand, one is aluminum and the other is titanium alloy, as long as the two pieces of material scratch each other, the scratched piece is aluminum, because titanium is harder than aluminum.
2. Compared with acid resistance, aluminum reacts immediately when it encounters acid, and titanium has good acid resistance.
3. Measure the weight. Aluminum doors of the same size are the lightest, titanium doors are slightly heavier, and steel doors are the heaviest. However, if the manufacturer intends to deceive people, they can use a mixture of aluminum and steel to make a door as heavy as titanium alloy. It's easy to tell if there's steel in the door though. Get a magnet and see if it sticks to the door. titanium alloy pipes are not magnetic and will not attract magnets.
4. Look at the color. Find an inconspicuous small corner, and use sandpaper to remove a layer of oxide film or paint on the surface to fully expose the underlying metal. Then look closely at the color of the metal. Take an empty coke can (aluminum) and sand off the paint on the surface to compare to the door. Aluminum alloys are light gray, titanium alloys are dark gray, and look more shiny than aluminum.
5. If possible, you can also measure resistance. The resistance of titanium alloy is much larger than that of aluminum alloy.
Second, what are the characteristics of aluminum alloy and titanium alloy?
Titanium alloy features: The alloy composed of titanium as the base and other alloying elements is called titanium alloy. Titanium alloy has the advantages of low density, high specific strength, good corrosion resistance and good process performance, and is an ideal structural material for aerospace engineering.
Research scope: Titanium alloys can be divided into structural titanium alloys and heat-resistant titanium alloys, or α-type titanium alloys, β-type titanium alloys and α+β-type titanium alloys. The research scope also includes forming technology of titanium alloy, powder metallurgy technology, rapid solidification technology, military and civilian use of titanium alloy, etc.
Aluminum alloy features: Aluminum alloy is made of pure aluminum with some alloying elements, such as aluminum-manganese alloy, aluminum-copper alloy, aluminum-copper-magnesium hard aluminum alloy, aluminum-zinc-magnesium-copper superhard aluminum alloy .
Aluminum alloy has better physical and mechanical properties than pure aluminum: easy processing, high durability, wide application range, good decorative effect, and rich colors. Aluminum alloys are divided into anti-rust aluminum, duralumin, super duralumin and other types, each type has its own range of use, and has its own code for users to choose.
2023年5月9日星期二
Grade 5 Ti-6Al-4V Titanium Sheet/Plate Manufacturers, Suppliers, Factory - Buy Best Price Grade 5 Ti-6Al-4V Titanium Sheet/Plate for Sale - HST TITANIUM
2023年5月4日星期四
Surgical Medical Titanium Wire Manufacturers, Suppliers, Factory - Buy Best Price Surgical Medical Titanium Wire for Sale - HST TITANIUM
Surgical Medical Titanium Wire is an alloyed, medium-strength titanium product. This grade features good weldability and corrosion resistance.
These benefits make Titanium Wire the ultimate dental and medical titanium grade and can be used in biomedical applications such as implantable components due to its biocompatibility, good fatigue strength, and low modulus.
2023年4月27日星期四
The cleaning method of the inner hole of the titanium tube!
Degreasing: After cooling the billet, use a metal degreasing agent to remove the oil on the inside and outside of the pipe. When taking oil, pay attention to check the position where the inner hole is easy to store oil, and ensure complete cleaning. Pickling: The purpose of pickling is to remove the oxide film produced after annealing on the inside and outside of the Grade 1 Titanium Tube. At room temperature, put a certain amount of clear water into the pickling tank, the normal ratio of HNO 3 to HF, HNO 3 and HF water is HF+residual H2O), and adjusted accordingly according to the actual situation.
The pickling time is 10-15 minutes, and it can also be determined according to the pickling situation. During the pickling process, you should often turn around to check to ensure that the pickling is even and complete, and avoid pickling too fast or over pickling. After pickling, The titanium tube is inspected by visual inspection, and the oxide skin on the inside and outside of the titanium tube is removed, the silvery white is removed, and washed.
After pickling and inspection, the titanium tube should be cleaned in time to remove residual acid and pickling materials from the inner hole and outer surface to ensure the details of the titanium tube are bright.
In order to eliminate the influence of the surface oxide film on the hydrogen absorption process, titanium can be heated in vacuum or hydrogen. When heated to 700~850°C, the oxides on the surface of the titanium tube begin to diffuse to the metal, and the hydrogen absorption rate of the titanium heat exchanger tube is greatly improved. However, this method eliminates the oxygen in the oxide film and enters the metal during the heat treatment process, which not only reduces the diffusion rate of hydrogen into the metal, but also causes oxygen to enter the final product, thereby reducing the quality of the product; at the same time, the titanium tube Particles during heat treatment will also cause a certain degree of sintering, reducing their hydrogen absorption rate.
2023年4月24日星期一
Titanium tube specifications and installation methods
Titanium alloy is the earliest developed and most widely used titanium alloy in the world. Its output accounts for more than half of the total output of various titanium alloy semi-finished products in the world, and more than 80% in the aerospace industry.
Introduce the precautions for installation, use, welding, transportation and maintenance.
1. Grade 2 Pure Titanium Tubes and elbows should be inspected regularly to keep the surface clean, remove dirt, and store them neatly in a ventilated place indoors. Do not pile them up or store them in the open.
2. When the ball valve, stop valve and gate valve of the titanium alloy pipe elbow are used, they are only fully open or fully closed, and are not allowed to adjust the flow rate, so as to prevent the sealing surface from being eroded and accelerated wear.
3. There is an inverted sealing device inside the gate valve and the upper thread stop valve, and the hand wheel is rotated to the top surface to ensure that it will not rust or fall. Keep the storage environment of titanium alloy pipes, titanium elbows, titanium size heads, titanium tees and other titanium pipe fittings dry and ventilated, keep the surface of pipes and pipe fittings clean and neat, and store them accurately.
Precautions for installation and transportation of titanium tubes:
1. Installation of titanium and titanium seamless pipes Titanium and titanium alloy pipe manufacturers should pay attention not to contact or collide with iron materials during transportation and storage of titanium and titanium alloy pipes.
2. Mechanical methods should be used for cutting titanium and titanium alloy pipes, and the cutting speed should be low. When cutting or grinding titanium pipes with grinding wheels, special grinding wheels should be used; flame cutting should not be used. Groove should be processed by mechanical method.
3. Inert gas shielded welding or vacuum welding should be used for welding titanium alloy welded pipes. Oxygen-acetylene welding or carbon dioxide gas shielded welding should not be used, and ordinary manual arc welding should not be used.
4. When installing titanium and titanium alloy pipes, do not use iron tools and materials to knock and squeeze; rubber plates or soft plastic plates should be placed between carbon steel supports, hangers and titanium and titanium alloy pipes to make them No direct contact with titanium and titanium alloy pipes; casings should be installed when titanium and titanium alloy pipes pass through walls and floors. The gap should not be less than 10mm, and insulation should be filled. The insulation should not contain iron impurities.
5. Titanium and titanium alloy pipes should not be directly welded with other metal pipes. When connection is required, looper flange connection can be used. The non-metallic gaskets used are generally rubber pads or plastic pads, and the chloride ion content should be controlled not to exceed 25ppm.