The difference and use of white titanium mesh and black titanium mesh:

1. Common points of materials:

Both white titanium mesh and black titanium mesh are produced by pure titanium wire. The grade of ERTi-5 Titanium Welding Wire is usually TA1, which has the advantages of high elongation, high titanium content, high mechanical strength and easy processing.

2. Common points of craftsmanship

The processing methods and machinery are exactly the same—all are weaving with plain square holes, and the raw material wire diameter, material, elongation, tensile strength testing methods and testing instruments are the same. They are all produced by mechanical processing of shuttleless woven nets. Warp knitting, mesh leveling, and laser cutting processes are the same.

Third, the common points of packaging

The same packaging is used: the inner packaging is made of air bubble cushion for waterproofing, and the outer packaging is packed in a glued wooden box to prevent squeezing and collision.

Fourth, the only difference

The only difference is the surface: the white surface has no impurities, and the black surface has a layer of brushed graphite emulsion.

Five, use

The white titanium mesh surface does not contain any impurities. It is suitable for the ion-exchange membrane electrolyzer ERTi-2 Pure Titanium Welding Wire anode, anodizing experiment, catalyst carrier support mesh, pure chemical liquid filter mesh and other non-contaminated solutions.

The surface of the black titanium mesh contains a brushed graphite emulsion coating, which is suitable for seawater desalination titanium filter and chemical filtration. The surface coating can slow down the corrosion of the titanium substrate and prolong the service life.