Precautions for installation and transportation of titanium pipes and titanium pipe fittings!

1. When installing titanium and titanium alloy pipes, please pay attention not to contact or collide with iron materials when transporting and storing titanium and bending titanium tubing.

2. The cutting of titanium and titanium pipes should adopt mechanical methods, and the cutting speed should be low; when titanium pipes are cut or reground with grinding wheels, special grinding wheels should be used; flame cutting should not be used, and the bevel should be processed by mechanical methods.

3. Inert gas shielded welding or vacuum welding should be used for the welding of titanium welded pipes. Oxygen-acetylene welding or carbon dioxide gas shielded welding should not be used, and ordinary manual arc welding should not be used.

4. When installing titanium and pipes, no iron tools and materials should be used to knock or squeeze; rubber plates or soft plastic plates should be padded between carbon steel supports, hangers and titanium, and titanium exhaust tubing to prevent them from interacting with each other. Titanium and titanium alloy pipelines are in direct contact; when titanium and titanium pipelines pass through walls and laminates, sleeves should be installed, the gap should not be less than 15mm, and the insulation should be filled. The insulation should not contain iron impurities.

5. Titanium and titanium pipes should not be directly welded to other metal pipes. When the connection is required, a loose flange connection can be used. The non-metallic gaskets used are generally rubber gaskets or plastic gaskets.