What should be paid attention to when analyzing titanium rod processing

1. Use blades with positive angle geometry to reduce cutting force, cutting heat and deformation of titanium rods.

2. Maintain constant feed to avoid hardening of the workpiece. The tool should always be in feed state during cutting. The radial cutting amount should be 30% of the radius during milling.

3. Use high-pressure and high-flow cutting fluid to ensure the thermal stability of the titanium rod processing process to avoid surface degeneration and tool damage caused by excessive temperature. 6al4v titanium rod / Grade 12 Titanium Bar / Titanium Grade 2 Round Rod

4. Keep the blade edge sharp. Blunt tools are the cause of heat accumulation and wear, which can easily lead to tool failure.

5. Process titanium alloy in a softer state as much as possible, because the material becomes difficult to process after hardening, and heat treatment increases the strength of the material and increases the wear of the blade.

6. Use a large tip arc radius or chamfer to cut in, and put as many blades into the cutting as possible. This can reduce the cutting force and heat at each point and avoid local damage. When milling titanium alloy, the cutting speed has a great influence on the tool life among the cutting parameters, and the radial cutting amount (milling depth) is second.