Introduction to the manufacturing process of titanium plates

Titanium plate manufacturing process:

1. Hot forging: a forging process performed above the metal recrystallization temperature.

2. Hot rolling: a rolling process carried out at a temperature higher than the recrystallization temperature.

3. Cold rolling: a rolling process in which the plastic deformation temperature is lower than the recovery temperature.

4. Annealing: A metal heat treatment process that slowly heats the metal to a specific temperature, maintains it for a sufficient time and then cools it at an appropriate speed (usually slow cooling, sometimes controlled cooling). 5. Pickling: Immerse the parts in an aqueous solution such as sulfuric acid to remove oxide and other films on the metal surface of the titanium plate. It is the pre-treatment or intermediate treatment for electroplating, enamel, rolling, and other processes. Grade 5 Ti-6Al-4V Titanium Plate / Grade 7 Ti-0.2Pd Titanium Plate / Gr9 Ti-3Al-2.5V Titanium Plate