The process parameters of laser welding are difficult to grasp, because the thermal efficiency fluctuates greatly during the welding process, and the surface condition of the welded titanium rod has a great influence on the thermal efficiency: the brighter the surface, the larger the emitted laser light, and most of the laser energy is reflected on other objects. , transferred to the surrounding material or medium in the form of "heat". But thermal efficiency changes suddenly. Before the titanium rod is melted, only about 10%-20% of the light energy is absorbed by the titanium rod and heats the titanium rod. When the temperature rises to the melting point of the weld metal and begins to melt, the light absorption rate of the titanium rod increases sharply . Grade 7 Titanium Rod company tells you that at this time, about 60%-80% of the light capacity is absorbed by the metal, and the sudden change of thermal effect can easily cause the weld to burn through.
In order to avoid or reduce this adverse effect, the grade 5 titanium rod company tells you that you can take corresponding measures, such as welding titanium rods; roughening the surface, using a pulsed laser beam; adjusting the input energy; adjusting the spot size; Pulse width and steepness.
A ruby natural crystal containing aluminum oxide and dissolved with a low concentration of chromium atoms is used as the working material of the laser generator, which is called a solid-state laser generator. If CO2 is used as the working substance of the laser generator, it is called a force gas laser generator.
At present, the power of the laser welding machine is only kilowatts, and it is expensive, the welding cost is high, and the application range is not wide. It is only used for the solder joints of some tiny parts in the manufacture of some instruments and meters, especially when some solder joints are hidden and cannot be welded by ordinary welding methods. Multi-station welding is possible using laser beams, optical fibers and deflection prisms.
没有评论:
发表评论