There must be not many people who do not know about titanium rod filters. Seamless Titanium Tube Grade 2 are widely used in our lives, and many operations are inseparable from it.
Its main material is to use titanium powder sintered filter element, which is generally used for pre-filtration or filter room. Therefore, its filtering effect is still good, and it plays a primary role in each operation. So such an important device is also required when it is installed, so how to install it specifically?
The first thing to pay attention to is that before the shell of the titanium rod and the equipment are used, it is necessary to check whether the sealing is in place, and it is very important to ensure the sealing of the equipment. For the equipment of the shell, it is necessary to have 15 minutes to 20 minutes of cleaning, so that it will not affect its filtration quality when it is used. When the normal working pressure of filtration should be controlled at 0.15 ~ 0.25 MPa, generally a low pressure effect is initiated at least 3-5 minutes before the normal use, so it is forbidden to increase the pressure during the operation. If the titanium rod is seriously blocked and the recoil effect is not obvious, then ultrasonic cleaning should be used.
没有评论:
发表评论