What should be paid attention to during the cutting process of titanium plate?

In view of these chemical properties of titanium metal, what problems should be paid attention to during the cutting process of Medical Titanium Plate Grade 2? The following titanium plate manufacturers will tell you.

(1) If it is a semi-automatic cutting, the guide rail should be placed on the surface of the titanium plate, and then the cutting machine should be placed on the guide rail, paying attention to the order not to be reversed.

(2) The cutting parameters should be appropriate, and should be reasonably determined according to the thickness of the titanium plate, so as to obtain a good cutting effect.

(3) Check whether the cutting nozzle is unblocked. If there is a blockage, it should be cleared in time.

(4) Before cutting the Titanium Clad Copper Sheet, the surface should be cleaned and a certain space should be left, which can facilitate the blowing of slag.

(5) The distance between the cutting nozzle and the surface of the titanium plate should be appropriate, too close or too far is not good.

(6) The preheating of the titanium plate should be sufficient, so as not to affect the cutting process.

(7) If you are cutting workpieces of different sizes, you should cut small pieces first, and then large pieces.