What problems should be paid attention to during the cutting process of titanium plate?

Many people don't know how to cut more trouble-free in the process of using a titanium plate. Actual titanium plate cutting has a certain scientific basis. Here are 7 kinds of titanium plate cutting techniques.

(1) When cutting semi-automatically, first put the guide rail on the surface of the titanium plate, and then put the cutter on the guide rail, the order should not be reversed.

(2) Reasonably determine the cutting parameters according to the thickness of the titanium plate to obtain a good cutting effect.

(3) Check whether the cutting nozzle gas is unblocked. If there is a blockage, it should be cleared in time.

(4) In addition, before blowing out the slag, the slag should be cleaned up.

(5) The distance between the cutting nozzle and the surface of the titanium plate should be appropriate, too close or too far is not good.

(6) The preheating of the titanium plate should be sufficient to avoid affecting the cutting process.

(7) If you want to cut out workpieces of different sizes first, then you should cut out workpieces of different sizes first.
Titanium Clad Copper Bar     titanium round rod     titanium tube     Ti-Al Sputtering Target