Titanium rods and titanium alloys have high chemical activity. Titanium rods and titanium alloys easily react violently with oxygen, nitrogen and other oxygen-containing gases at high temperatures. When heated in air, the surface of the blank forms an oxide scale and a surface getter layer. Titanium rods and titanium alloys are easy to absorb hydrogen when heated, which causes difficulties in the processing of certain types of titanium alloy materials.
Titanium rods and titanium alloys have poor thermal conductivity. The thermal conductivity of titanium rods and titanium alloys is usually only 1/15 of that of alloys and 1/5 of that of steel. The lower thermal conductivity results in a large temperature difference between the ingot and billet section in the hot B inch, which produces a large thermal response, and cracks will form in severe cases. Therefore, the heating speed must be limited, and the temperature change, deformation speed, Deformation rate, deformation equipment.
Polycrystalline transformation of titanium rods and titanium alloys. Titanium has a-β phase transition. Heating top temperature can significantly increase plasticity and reduce deformation resistance, but the deformation of the β zone is not good enough to obtain a structure with good performance.
The cold deformability of titanium alloy is low. Cold working deformation of most titanium alloys is difficult. A little preheating (to 200~300T) can significantly reduce the deformation resistance and improve plasticity.
Titanium is easy to bond and deform tools. This tendency tends to deteriorate the surface quality of the processed material and puts forward more stringent requirements on the deformed tools and molds and process lubrication.
High yield ratio and low elastic modulus. Straightening in a cold state is very difficult.
Ti 6246 Titanium Rod titanium alloy bar bending titanium pipe Titanium Rotary Target
没有评论:
发表评论