Titanium plate manufacturing process and characteristics

Titanium plate manufacturing process Hot forging process performed above the metal recrystallization temperature.

Hot rolling is a rolling process performed at a temperature above recrystallization.

Rolling process in which the plastic deformation temperature of the cold-rolled concrete is lower than the recovery temperature.

Annealing: A metal heat treatment process that slowly heats a metal to a certain temperature, holds it for a sufficient time, and then cools it at a suitable rate (usually slow cooling, sometimes controlled cooling).

Pickling: The product is immersed in an aqueous solution such as sulfuric acid to remove thin films such as oxides on the metal surface. Pre-treatment or intermediate treatment of electroplating, enamel, rolling and other processes

Features of titanium plate

1. Titanium seed plate is an oxide film on the surface, which is equivalent to a good durable abrasion-resistant hair release agent. Using titanium seed plate saves the release agent and makes the electrode plate

The peeling is easy, and the pre-treatment process of the seed plate is avoided. The titanium seed plate is half lighter than the copper seed plate.

2. The service life of titanium seed board is more than 3 times that of copper seed board. Depending on the operating conditions, it can reach 10 to 20 years.

3. The crystal structure of electrolytic copper made from titanium seed plate is dense, the surface is smooth and smooth, and the quality is excellent.

4. As the titanium seed board does not need to be coated with a separating agent, it can avoid the contamination of the copper electrolyte.

5. Increasing production capacity and reducing the production cost of electrolytic copper, which has better economic benefits.
titanium hex bar    titanium foil sheet    Grade 23 Titanium Rod    titanium exhaust pipe