Technical treatment method for TC11 titanium rod/titanium alloy rod low-magnification white bright block

Titanium alloy parts have the characteristics of low density and good corrosion resistance, so they have become more ideal structural materials for aerospace engineering; however, there are also many factors that affect its machinability at the same time; this is because of the metallurgical properties of titanium alloys And material properties may have a serious impact on the cutting action and the material itself.

The clamping principle of titanium alloy parts is the key technology for titanium alloy manufacturers to process titanium alloys, as follows:

(1) The clamping force in the rough machining stage should be large to prevent the parts from loosening during the high cutting force machining process; the clamping force should be small in the finishing machining stage to prevent clamping deformation.

(2) The clamping force is applied to the place with good rigidity, and the force point should be as many as possible.

(3) Appropriate auxiliary devices should be added for thin-walled structural parts with poor rigidity to increase the rigidity of the entire processing technology system.
forging titanium round rod     Grade 7 Titanium Wire     titanium alloy welding wire     titanium bicycle pipe