Titanium rods have good physical and chemical properties, low density, lightweight, non-magnetic, high strength, good corrosion resistance, and good mechanical properties and welding properties. Baoji titanium rods are widely used in chemical equipment, seawater For desalination, ship parts, electroplating industry, etc., titanium's corrosion resistance is 10 times that of general stainless steel, and titanium metal is a metal with relatively low human body rejection, so the processed parts of medical titanium rods are widely used in human implants and medical devices use.
skills requirement:
1. The chemical composition of titanium and titanium alloy bars should meet the requirements of GB/T 3620.1. When the buyer is re-inspected, the allowable deviation of the chemical composition should meet the requirements of GB/T 3620.2.
2. The diameter or side length of the hot processed bar and its allowable deviation should meet the requirements of Table 1.
3. After hot processing, after turning (polishing) the bar and cold rolling, the allowable deviation of the diameter of the cold drawn bar shall meet the requirements of Table 2.
4. The out-of-roundness of the turned (polished) bar after hot working should not be more than half of its dimensional tolerance.
5. The indefinite length of the bar in the processed state is 300-6000mm, and the indefinite length of the bar in the annealed state is 300-2000mm, and the fixed or double-length should be within the range of indefinite length
没有评论:
发表评论