Metallurgical engineering alloying of titanium liquid in the process of making titanium rods

The operation of adjusting the composition of the titanium liquid alloy during the production of the titanium rod is called alloying, which includes the alloying of the titanium liquid in the electric furnace process and the fine adjustment of the alloy composition of the titanium liquid in the late stage of the refined process. The alloying of titanium rods produced by traditional electric furnaces in metallurgical engineering is generally pre-alloyed in the late oxidation and early recovery stages, and the alloy composition is fine-tuned in the late recovery, before titanium extraction, or during titanium extraction. The alloying of titanium rods produced by modern electric furnaces generally ends in the titanium cladding during the titanium extraction process. When titanium is galvanized, the alloying in the titanium cladding is pre-alloyed, and the accurate alloy composition adjustment is ended in the quintessence furnace. The alloying operation mainly refers to the time and number of alloy participation.
Alloy participation time. The general principles for metallurgical engineering to participate in ferroalloys are: elements with high melting point and not easy to be oxidized can be added early, such as nickel can participate with the charge, the yield is still above 95%; low melting point, easy to oxidize late participation, such as iron boron When participating in the titanium bag during the titanium extraction process, the recovery rate is only about 50%.
In addition, the deoxidation operation and the alloying operation cannot be completely separated. Generally speaking, the deoxidation element is added first, and the alloying element is added later; the deoxidation ability is relatively strong, and the more expensive alloy element should participate in the excellent degassing of the titanium liquid. For example, the participation order and purpose of oxidizable elements should be: adding aluminum to deoxidize 2 to 3 minutes before titanium extraction, adding titanium to fix nitrogen, adding boron during titanium extraction, and advancing boron recovery rate. In this case, the yields of the three are 65%, 50%, and 50%, respectively.
Number of participants. The chemical composition of metallurgical engineering has a great influence on titanium M and its function. On the spot, the amount of alloy participation is quickly and accurately calculated according to the type of titanium rod produced by smelting, the amount of titanium liquid in the furnace, the composition of the furnace, the composition of the alloy, and the yield of the alloy.
The ingredients of the electric furnace adopt high carbon distribution, and its main purpose is:
 In the metallurgical engineering, when blowing oxygen to aid fluxing, the carbon oxidizes before the iron, and then reduces the iron burning loss.
 Carburization can reduce the melting point of waste titanium and accelerate melting.
(3) The carbon-oxygen reaction constitutes a molten pool agitation, which promotes the slag-titanium reaction and is beneficial to early de-disc.
(4) During the quintessential warming-up period, the vivid carbon-oxygen reaction expands the slag-titanium interface, which is beneficial to further dephosphorization, the homogenization of the titanium liquid composition and temperature, and the floating of gas and inclusions.
(5) The vivid carbon-oxygen reaction contributes to the formation of foamed slag, advances the heat transfer power, and accelerates the temperature increase process.

The amount of carbon distribution and the methods of carbon participation, oxygen blowing, oxygen supply intensity and furnace power are very large and need to be judged according to practical conditions.

titanium rod factory     titanium foil     titanium forging price     titanium sheet

Application of titanium tubes and titanium alloy tubes in the field of coolers in China

At present, China's economy maintains high speed and healthy development, which provides a good market environment for the development of the domestic titanium industry. Titanium for the domestic chemical industry, titanium for electric power, titanium for marine development, titanium for the automotive industry, titanium for bioengineering, etc., especially the newly launched large aircraft program in China has also greatly stimulated the domestic market demand for titanium materials. 

All have become the main driving force for the development of the domestic titanium industry. This is not only a huge development opportunity for domestic titanium alloy production enterprises, but also a severe challenge to the domestic titanium alloy industry, which requires titanium alloy enterprises to improve the technical content of products, optimize the industrial structure, and improve their own management level. It is believed that after several years of catching up, China's titanium industry can play an increasingly important role in the global titanium industry.

gr12 titanium bar      titanium planar sputtering target      titanium exhaust tubing      titanium rolling sheet

Overview of the application of titanium tubes and titanium alloy tubes in the field of coolers

Titanium and titanium alloys are known as "space metals" and "ocean metals" due to their high specific strength, good thermal stability, corrosion resistance, and non-magnetic properties. They are widely used in aerospace, chemical, petroleum, metallurgy, and power And shipping and other fields. Since the 1950s, titanium has developed into the main structural material of aircraft, and has become the material of choice for the manufacture of important components such as high-performance aircraft engine fans, compressor wheels and blades. With the continuous development of the aerospace industry, the titanium alloy industry has developed rapidly as a late-start emerging industry, especially in recent years, driven by the Chinese market, the international titanium alloy production and market demand have experienced a During the period of rapid development, global titanium output has doubled in the past four years.

Titanium Condenser is a part of the refrigeration system. It belongs to a type of titanium heat exchanger. It can convert gas or vapor into liquid, and transfer the heat in the titanium tube to the titanium tube in a fast way. In the air nearby. The working process of the cooler is an exothermic process, so the cooler temperature is higher.

Power plants use many coolers to condense the steam from the turbine. Coolers are used in refrigeration plants to condense refrigeration vapors such as ammonia and freon. In the petrochemical industry, coolers are used to condense hydrocarbons and other chemical vapors. During the distillation process, the device that transforms the vapor into a liquid state is also called a condenser. All coolers operate to remove the heat of gas or steam.

gr12 titanium bar      titanium planar sputtering target      titanium exhaust tubing      titanium rolling sheet

Production and application of titanium and titanium alloy pipes at home and abroad

There are 8 main titanium material producers in the world, and they are ranked according to the output in the order of the United States, Russia, Japan, China, United Kingdom, France, Germany and Italy. In recent years, driven by the economic growth of Asian countries including China and Japan, especially the rapid growth of titanium used in petrochemical and military industries with China as the core, the demand for titanium materials in the world has increased rapidly.

It grows by double digits every year. The United States is the world's largest country in demand for titanium materials. It is also the largest producer, with output exceeding 35,000 tons in 2012; Russia ’s titanium output ranks second in the world, with output of around 30 thousand tons in 2012; China produced approximately 28,000 tons of titanium in 2012, and is expected to exceed 3.0 in 2013 10,000 tons; Japan's 2012 output also reached about 19,000 tons; the output of titanium in Europe has not changed much in the past two years. However, compared with the advantages of developed countries in the deep processing and application of titanium materials, the development of domestic titanium materials is still relatively extensive, and most of them still remain in the processing of raw materials or crude products. A small number of finished products with higher technical content are mainly used in military products. The cost and other reasons cannot be promoted to the civilian field on a large scale.

grade 12 titanium bar      titanium square rod      titanium square bar      bending titanium pipe

The relationship between the quality of titanium alloy watches and heat treatment

The quality of titanium alloy watches is mainly determined by the pickling process after heat treatment, but if the surface oxide scale formed by the previous heat treatment process is thick, or the structure is uneven, pickling does not improve the surface finish and uniformity. Therefore, full attention should be paid to the heating or surface cleaning before heat treatment.

Titanium alloys have dozens of alloy components, and cadmium, lead, iron, titanium, copper and other elements are often added. However, I do n’t know how much the content of  gr7 titanium alloy plate elements used in watch cases and straps. In recent years, titanium alloys containing 1% copper and 0.1% titanium and titanium alloys containing 22% aluminium have emerged, which generally highlight creep strength, low-temperature plasticity and superplasticity. Titanium alloys are used in battery cases, printed boards, roofing panels, and daily hardware, so watches that use it as a case and strap are not expensive.

If the thickness of the scale on the surface of the titanium alloy plate is uneven, the surface finish of the base metal under thick and thin places is also different. When the titanium tube surface is pickled, the surface scale is dissolved and the base metal at the site where the scale is attached is acidic The degree of erosion is different, so the surface of the steel plate is uneven. Therefore, it is necessary to form scale uniformly during heat treatment and heating. To meet this requirement, the following conditions are involved and attention should be paid.

Compared with stainless steel,  grade 5 titanium tube is more advantageous in terms of weight and hardness. It is used to manufacture watch cases, which is about half the weight of the same steel watch, and is not prone to scratches. Correspondingly, the production cost is several times that of stainless steel. Titanium alloy also has a wide range of applications in the medical field. The "artificial bones" made with it can be connected to flesh and blood to support and strengthen, and never need to be replaced (other metal materials can not be done), so it enjoys the "pro The reputation of "biometal", of course, watches made with it do not have to worry about skin allergies and other problems.

If oil adheres to the surface of the workpiece during heating, the thickness of the scale at the oil-attached part is different from the thickness and composition of other parts, and carburization will occur. The carburized part of the base metal under the oxide scale will be severely attacked by acid. The oil droplets ejected when the heavy oil burner initially burns, if attached to the workpiece, will have a great influence. The fingerprint of the operator can also be affected when it is attached to the workpiece. Therefore, bath masters should not directly touch the forging titanium round rod parts with their hands and do not get new oil stains on the workpieces. Must wear clean gloves. If there is lubricating oil attached to the surface of the workpiece during cold working, it must be fully degreased in trichloroethylene degreasing agent and caustic soda solution, then washed with warm water, and then heat treated.

Effect of heat treatment process on microstructure and properties of TC4 titanium alloy

Titanium and its alloys are widely used in aerospace, automotive, chemical and marine industries due to their advantages of low density, high specific strength and good corrosion resistance. TC4 titanium alloy contains 6% α-phase-stable element Al and 4% β-phase-stable element V. It belongs to the typical α + β type two-phase thermally strong titanium alloy of Ti-Al-V series and has good mechanical properties and technological properties. It can be processed into the supply of semi-finished products such as bars, profiles, plates, forgings, etc., and is more and more popular. At present, the domestic research mainly focuses on the high-temperature performance, creep performance and thermal stability of TC4 titanium alloy, and there is relatively little research on how to formulate a reasonable heat treatment process to meet its actual performance. In this paper, it is of great theoretical and practical significance to study the influence of the heat treatment process on the microstructure and mechanical properties of the TC4 alloy sheet by different processes.

Sponge titanium, high-purity aluminium (99.99%) and aluminium-vanadium alloy are smelted in a vacuum water-cooled copper crucible non-consumable electric arc furnace at a certain ratio, electromagnetic field stirring, argon protection. The alloy composition after smelting is (mass fraction,%): 6.29Al, 4.14V, 0.029Fe, 0.023C, 0.19o, and the balance is Ti. In order to ensure the uniformity of the chemical composition of the sample, the TC4 alloy bar was prepared by three times of reflow melting, rolled into a plate with a thickness of 3 mm, and subjected to stress relief annealing treatment at 650 ° C × 4h. The stress-relieved and annealed sheet is processed into microstructure observation samples and tensile samples, and different heat treatments are carried out: annealing (790 ℃ × 3h), solution quenching (980 ℃ × 1h, water cooling), solution ageing ( 980 ℃ × 1h, water cooling + 580 ℃ × 8h, furnace cooling). The heat-treated samples were tested for tensile properties.

After annealing, the TC4 alloy is cooled in the furnace and both phases recrystallize. The α-phase is recrystallized, and small polygonal crystal grains are precipitated in the deformed matrix, and the secondary α is precipitated in the recrystallized β-phase, and the α-phase structure is distributed on the matrix of the β-transformed structure, and the structure is relatively uniform. Since the internal stress is eliminated, the plasticity and tissue stability are improved, but the strength and hardness are reduced. After solution quenching, the aspect ratio of the alpha sheet is reduced, the straight alpha sheet is distorted, and the continuous beta phase boundary is destroyed, forming a thin sheet or basket-like alpha, beta phase from the high-temperature region, rapid cooling is too late Forming the α phase and forming the metastable β phase. The microstructure at room temperature is martensite α '' and metastable β phase. The strength and hardness are improved, but the plasticity is reduced more. After solution aging, the martensite α ”and metastable β phases are partially decomposed and transformed into stable and dispersed α phases and β phases, whose strength and hardness are higher than that of furnace cooling, but the plasticity is lower than that of furnace cooling The overall performance of the alloy has been improved.

gr23 titanium alloy wire      bend titanium tube      titanium foil grade 5      titanium rotary sputtering target

High-strength and high-toughness β-type titanium alloy

The β-type titanium alloy was originally the B120VCA alloy (Ti-13v-11Cr-3Al) developed by American Crucible in the mid-1950s. The β-type titanium alloy has good hot and cold processing properties, is easy to forge, can be rolled and welded, and can obtain high mechanical properties, good environmental resistance, and good combination of strength and fracture toughness through solution-aging treatment. The new high-strength and high-toughness β-type titanium alloys are representative of the following types: Ti1023 (Ti-10v-2Fe- # al), which is equivalent to the 30CrMnSiA high-strength structural steel commonly used in aircraft structural parts, and has excellent forging properties ; Ti153 (Ti-15V-3Cr-3Al-3Sn), the cold workability of this alloy is better than industrial pure titanium, the room temperature tensile strength after aging can reach more than 1000MPa; β21S (Ti-15Mo-3Al-2.7Nb-0.2Si ), The alloy is a new type of oxidation-resistant, ultra-high-strength titanium alloy developed by Timet Division of American Titanium Metal Company. It has good oxidation resistance, excellent cold and hot processing properties, and can be made into a foil with a thickness of 0.064mm; SP-700 (Ti-4.5Al-3V-2Mo-2Fe) titanium alloy developed by Japan Steel Pipe Corporation (NKK) has high strength, superplastic elongation of up to 2000%, and superplastic forming temperature is higher than Ti-6Al- 4V low 140 ℃, can replace Ti-6Al-4V alloy with superplastic forming-diffusion connection (SPF / DB) technology to manufacture various aerospace components; BT-22 developed by Russia (TI-5v-5Mo-1Cr-5Al ), Its tensile strength can reach more than 1105MPA.

grade 5 titanium wire      grade 12 titanium tube      titanium bicycle pipe      titanium foil sheet