Titanium plate manufacturing process and industry application

Titanium is stable in the air at room temperature; because titanium has low density and high strength, the density is only half that of steel and the strength is almost the same as steel, high temperature resistance and low temperature resistance, corrosion resistance and other excellent characteristics, the strength of titanium alloy is higher than steel. Titanium is known as "space metal", and it can maintain high strength and mechanical properties in a wide temperature range of -253 ° C ~ 500 ° C. Ultra-Thin Titanium Alloy Sheet is also known as "biophilic metal". Fix the damaged bone with a titanium splint and titanium bone nails. After a few months, the bone will grow on the titanium splint and the threads of the titanium bone nails, and new muscles will wrap around the titanium splint. "Titanium bone" is just like a real bone, and even titanium artificial bone can be used instead of entering the bone to treat fractures.

  Craftsmanship:

Hot forging is a forging process carried out above the metal recrystallization temperature.

Hot rolling is a rolling process performed above the recrystallization temperature.

Cold rolling: The rolling process in which the plastic deformation temperature is lower than the recovery temperature.

Annealing: A metal heat treatment process in which the metal is slowly heated to a certain temperature, maintained for a sufficient time, and then cooled at an appropriate rate (usually slow cooling, sometimes controlled cooling).

Pickling: Immerse the workpiece in an aqueous solution such as sulfuric acid to remove oxides and other films on the metal surface. It is the pretreatment or intermediate treatment of electroplating, enamel, rolling and other processes.

Application fields: aerospace, machinery, chemical industry, electrolysis, medical treatment, sports and other industries.

Titanium Washer, Titanium Flat Washer DIN 125, Titanium Flat Washers for Sale - HST TITANIUM

Titanium Washer, Titanium Flat Washer DIN 125, Titanium Flat Washers for Sale - HST TITANIUM: As one of the most professional titanium flat washer din 125 manufacturers, suppliers and companies in China, we're featured by quality products and competitive price. Please rest assured to buy cost-efficient titanium flat washer in stock here from our factory. Contact us for more products for sale.

Titanium Flat Washers are designed to enhance the load-bearing capabilities of a threaded fastener and are compatible with a large range of screws.

ASTM B265 TA6V Titanium Plate Manufacturers, ASTM B265 TA6V Titanium Plate Stock - HST TITANIUM

ASTM B265 TA6V Titanium Plate Manufacturers, ASTM B265 TA6V Titanium Plate Stock - HST TITANIUM: As one of the most professional astm b265 ta6v titanium plate manufacturers, suppliers and companies in China, we're featured by quality products and competitive price. Please rest assured to buy cost-efficient astm b265 ta6v titanium plate in stock here from our factory. Contact us for more products for sale.

ASTM B265 TA6V Titanium Plate is a lustrous transition metal which is silver in colour. The two most useful properties of the ASTM B265 TA6V Titanium Plate are considered to be its resistance to corrosion as well as its strength to density ratio.

Classification, properties and applications of titanium alloys

Titanium and titanium alloys have good welding, hot and cold pressure processing, and machining properties, and can be processed into various titanium profiles, titanium rods, titanium plates, and titanium pipes for supply. Titanium is an ideal structural material. The density of titanium is only 4.5g/m3, which is 43% lighter than steel, but its strength is twice that of iron and almost five times that of pure aluminum. It has a low density and high strength properties. This combination of high strength and low density makes titanium rods occupy an extremely important position in technology. At the same time, the corrosion resistance of titanium alloy rods is close to or exceeds that of stainless steel, so it has been widely used in the petroleum, chemical industry, pesticides, dyes, papermaking, light industry, aviation, space development, marine engineering, etc. Titanium alloys have high specific strength (ratio of strength to density). Titanium Flat Washer DIN 125 alloy rods and pure titanium rods have played an irreplaceable role in aviation, military industry, shipbuilding, chemical industry, metallurgy, machinery, medical treatment, and other fields. For example, the alloy composed of titanium and aluminum, chromium, vanadium, molybdenum, manganese, and other elements, after heat treatment, the strength limit can reach 1176.8-1471MPa, and the specific strength can reach 27-33, and the alloy steel with the same strength has only 15.5 -19. Titanium alloys are not only high in strength but also resistant to corrosion, so they are widely used in shipbuilding, chemical machinery, and medical equipment. Among them, corrosion-resistant titanium alloys are mainly used in reactors, towers, autoclaves, heat exchangers, pumps, valves, centrifuges, pipes, fittings, electrolyzers, etc. in various highly corrosive environments. However, due to the high price of titanium alloys, their application is limited.

Titanium Clad Copper Plate Manufacturers, Suppliers, Factory - Buy Best Price Titanium Clad Copper Plate for Sale - HST TITANIUM

Titanium Clad Copper Plate Manufacturers, Suppliers, Factory - Buy Best Price Titanium Clad Copper Plate for Sale - HST TITANIUM: As one of the most professional titanium clad copper plate manufacturers, suppliers and companies in China, we're featured by quality products and competitive price. Please rest assured to buy cost-efficient titanium clad copper plate in stock here from our factory. Contact us for more products for sale.

Copper is a good conductor. Titanium has good corrosion resistance in many chemicals. Composite materials composed of copper and titanium have good applications in the electrochemical industry. The production of titanium clad copper materials is best suited for explosion welding.

Why is titanium alloy difficult to process

The machinability of titanium alloy is 20-40% of that of 45# steel, and if the hardness is less than HB300, strong knife sticking will occur; if HB>370, it is too hard to process, so it is best to process titanium alloys with a hardness of HB300-370. The main reasons affecting its machinability are briefly described as follows: 1) Gas impurities (oxygen, nitrogen and hydrogen, etc.) have a great influence on the machinability of titanium alloys, because titanium has high chemical activity and is easy to combine with gas impurities . When the temperature exceeds 600 degrees, titanium welding filler wire is oxidized to form an embrittlement layer, the so-called "tissue alpha layer"; hydrogen embrittlement occurs with hydrogen; hard and brittle TiN is formed with nitrogen at high temperature. 2) The plasticity of titanium alloy is small, which obviously affects its plastic deformation during cutting. The deformation coefficient of titanium alloy is only 1 or even less than 1, while that of ordinary carbon steel is about 3. When cutting, there is a very small contact surface between the chip and the rake face, so that the pressure and local temperature in the contact area are high, and the tool wears quickly. 3) Severe work hardening will occur when titanium alloy is processed. 4) When C>0.2%, the Grade 3 Pure Titanium Tube alloy will form hard carbides, which will cause abrasive wear of the tool and reduce the machinability

Titanium Hex Nut Manufacturers, Suppliers, Factory - Buy Best Price Titanium Hex Nut for Sale - HST TITANIUM

Titanium Hex Nut Manufacturers, Suppliers, Factory - Buy Best Price Titanium Hex Nut for Sale - HST TITANIUM: As one of the most professional titanium hex nut manufacturers, suppliers, and companies in China, we're featured by quality products and competitive prices. Please rest assured to buy a cost-efficient titanium hex nut in stock here from our factory. Contact us for more products for sale.
These hex nuts are also resistant to seawater up to 500 °F and have proven to last almost 20 years when tested in contaminated seawater. In addition, there are no signs of pitting or crevice corrosion at a distance of 1 and a half kilometers from the surface. It also withstands up to 120 feet of erosion per second, making it suitable for the aerospace industry.

Grade 9 Ti-3Al-2.5V Titanium Wire Manufacturers, Suppliers, Factory - Buy Best Price Grade 9 Ti-3Al-2.5V Titanium Wire for Sale - HST TITANIUM

Grade 9 Ti-3Al-2.5V Titanium Wire Manufacturers, Suppliers, Factory - Buy Best Price Grade 9 Ti-3Al-2.5V Titanium Wire for Sale - HST TITANIUM: As one of the most professional Grade 9 Ti-3Al-2.5V Titanium Wire manufacturers, suppliers and companies in China, we're featured by quality products and competitive price. Please rest assured to buy cost-efficient Grade 9 Ti-3Al-2.5V Titanium Wire in stock here from our factory. Contact us for more products for sale.

Grade 9 Ti-3Al-2.5V Titanium Wire

1. Grade 9 titanium wire has medium strength and excellent corrosion resistance.
2. It has high-temperature resistance and can be used at high temperatures.
3. It is mostly used in aerospace and aircraft parts.

Types of pure titanium plates and their differences from other titanium alloys

Pure titanium plates can be divided into three types: hot rolling, forging and cold drawing. The specification of hot-rolled pure titanium plate is 5.5-250mm. Among them: 5.5-25 mm small pure titanium plates are mostly supplied in straight strips, often used as titanium alloys, bolts and various mechanical parts; pure titanium plates larger than 25 mm are mainly used for manufacturing mechanical parts or making seamless titanium Tube blank.

The physical and mechanical properties are different. Due to the difference in chemical composition and strength of titanium alloys, there are differences in physical and mechanical properties. The cold bending performance of the pure titanium plate is better, it can be used as a 180-degree hook, and the threaded titanium can only be used as a 90-degree straight hook; the weldability of the pure titanium plate is better, and ordinary carbon electrodes can be used. Use low-alloy electrodes; threaded titanium is better than pure titanium plates in terms of toughness and fatigue resistance.

The difference between Grade 7 Titanium Sheet and other titanium alloys: 1. The appearance is different. The appearance of pure titanium plate is smooth and round, without lines and ribs. The bonding force of titanium alloy is small, while the bonding force of other titanium alloys and concrete is large. 2. The composition is different. Pure titanium plate (first-grade titanium) belongs to ordinary low-carbon titanium, and other titanium alloys are mostly alloy titanium. 3 The strength is different, the strength of pure titanium plate is low, and the strength of other titanium is high. The plasticity of the titanium alloy is stronger than that of other titanium alloys, that is, the pure titanium plate has a large deformation before being broken, while the deformation of other titanium alloys is much smaller before being broken. 4. The physical and mechanical properties are different. Due to the difference in chemical composition and strength of titanium alloys, there are differences in physical and mechanical properties. The cold bending performance of the pure titanium plate is better, it can be used as a 180-degree hook, and the threaded titanium can only be used as a 90-degree straight hook; the weldability of the pure titanium plate is better, and ordinary carbon electrodes can be used. Use low-alloy electrodes; threaded titanium is better than pure titanium plates in terms of toughness and fatigue resistance.